Wiring Guide Videos

Wiring IoTMeter to a Circuit on Equipment

Wiring an external buzzer to Netbell-KB

Wiring an external bell to Netbell-K

Wiring an external bell to Netbell-KL

Wiring a Bell/Buzzer to Netbell-Ultra 300

How to Wire a 24 VAC Bell to Netbell-Ultra-300

Wire a Push Button to Netbell-Ultra-300 Controller

Wiring a Bell to Netbell-2

Wiring a Buzzer to Netbell-2

Wiring Netbell-NTG to an amplifier

How to Wire Netbell-NTG-H Paging System (70V)

How to Wire Emergency Palm Push Button Switch

Use a Push Button Switch on Netbell-2 for Emergency

Use a Push Button Switch on Netbell-NTG for Emergency

How to Wire a Step Relay to Ultra 300 to Drive External Devices

How to Adjust Your Netbell Buzzer Volume

Software Configuration Videos

To access the device built-in web-based software, you will need to find the device IP address on your network. There are different ways to find the IP address such using cmd command on your PC to ping the IP address, or logging to your router to find the device. The easiest way is to use our free Discover program to locate the device, it will display all Linortek devices once this program is installed on your computer. Watch the video “Install Java and Discover Program” below to get started.

Install Java and the Linortek Discover Program

Setting Time and Date

Netbell Software Initial Setup – Basic Settings

Netbell-NTG Initial Setup – Basic Settings

iTrixx-WFMN Wireless Hour Meter Initial Setup

iTrixx-WFMN WiFi Hour Meter Basic Setting

iTrixx-Ultra 300 Software Configuration

How to Create Custom Sounds for Netbell-NTG

Configuring the Hour Meter on the IoTMeter

Digital Input Settings

How to Use the Netbell BellScheduler Desktop App

Updating Your Linortek Device’s Software

How to Port Linortek Device to the Internet

Netbell IP Paging System Software Configuration

The Network Audio Configuration Tool (NACT) is a free desktop application used for the initial setup of your Linortek Netbell IP paging system. Once the system is set up, you will only need this app when you need to change device configurations.

Netbell IP Paging System – Part 1: Prepare the NACT App

Netbell IP Paging System – Part 2: Setup IP Speakers

Netbell IP Paging System – Part 3: Netbell-NTG-B Basic Configuration 

Netbell-AU-711-SIP Basic Configuration

Reset to Factory Default

For various reasons, you might want to reset your SERVER to factory default (i.e., you forget your credentials). To reset your Linortek devices to factory default from the hardware, you need to use the RESET and RELOAD/DELT push button switches to do the resetting. Please check the model you have and find the associated video for instructions on how to reset your device to factory default.

Reset to Factory Default from Software

Reset to Factory Default – iTrixx-WFMN

Reset to Factory Default – Netbell-NTG

Reset to Factory Default – Netbell-K

Reset to Factory Default – Ultra 300

Reset to Factory Default – Koda

Reset to Factory Default – Fargo

Marketing Videos

About Us

Introducing Netbell Break Timed Alert System

Introducing iTrixx Wireless Equipment Hour Meter

Introducing Linortek iTrixx Wireless Equipment Runtime Meter with MQTT Protocol

iTrixx Wireless Equipment Hour Meter for Forklift