Connect a 12VDC Bell to Netbell-2
- Find Output 1 on the Netbell-2 device, which has two terminals.
- Connect the negative wire from the bell to Output 1.
- Then connect the negative wire from the 12VDC power supply (marked with white stripes) to Output 1.
- Ensure the positive wire from the bell connects to the positive wire from the power supply (solid black).
Note: If using provided WAGO connectors, only insert bare copper wire into the slot, avoiding the insulated part.
Connect a 24VAC Extra Loud Bell to Netbell-2
- Find Output 1 on the Netbell-2 device, which has two terminals.
- When wiring 24VAC device there is no positive or negative side.
- Connect one wire from the bell to Output 1.
- Connect 2 conductor wire to the 24VAC Power supply (AC and AC terminals).
- Then connect one wire from the 24VAC power supply to Output 1.
- Ensure the second wire from the bell connects to the second wire from the power supply.
Note: If using provided WAGO connectors, only insert bare copper wire into the slot, avoiding the insulated part.
Connect a 24VAC Buzzer to Netbell-2
- Find Output 1 on the Netbell-2 device, which has two terminals.
- When wiring 24VAC device there is no positive or negative side.
- Connect one wire from the buzzer to Output 1.
- Connect 2 conductor wire to the 24VAC Power supply (AC and AC terminals).
- Then connect one wire from the 24VAC power supply to Output 1.
- Ensure the second wire from the buzzer connects to the second wire from the power supply.
Note: If using provided WAGO connectors, only insert bare copper wire into the slot, avoiding the insulated part.
